MC80 - Stabilizer
Manifolds and stabilizers
Manifold MC80 – STABILIZER is a second stage pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units
MC80 - StabilizerIntroduction
MC80 – STABILIZER is only second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MC80, MM90 or liquid oxygen tank (LOX). When there is a signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with a pressure transmitter 4–20 mA or with a contact gauge.
The gas reduction unit MC80 – STABILIZER must always be installed in compliance with the standards EN ISO 7396-1 and the appropriate national standards.
MC80 - StabilizerIntroduction
MC80 – STABILIZER is only second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MC80, MM90 or liquid oxygen tank (LOX). When there is a signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with a pressure transmitter 4–20 mA or with a contact gauge.
The gas reduction unit MC80 – STABILIZER must always be installed in compliance with the standards EN ISO 7396-1 and the appropriate national standards.
MC80 - StabilizerFeatures
MC80 STABILIZER INCLUDES THE FOLLOWING COMPONENTS:
- MC80 Stabilizer Manifold
FOR A COMPLETE MC80 STABILIZER MANIFOLD ADD:
- Alarm unit (included if ordered together with HP unit)
- Ball valve DN15 with welding adaptors
MC80 - StabilizerFeatures
MC80 STABILIZER INCLUDES THE FOLLOWING COMPONENTS:
- MC80 Stabilizer Manifold
FOR A COMPLETE MC80 STABILIZER MANIFOLD ADD:
- Alarm unit (included if ordered together with HP unit)
- Ball valve DN15 with welding adaptors
MC80 - StabilizerGeneral properties
General properties
| Gas type(s) | O2, Air, N2, N2O, CO2 |
|---|---|
| Nominal flow (m3/h) | 200 |
| Inlet nominal pressure (BAR) | 20 (2 000 kPa) |
| Outlet nominal pressure | 4,5 bar (setting range 0,5–6 bar) |
| Inlet connection | G3/4"F |
| Outlet connection | G3/4"F |
| Pressure relieve valve | 6,8 bar |
| Pressure relieve valve pipe dimension | ø 15 mm |
Configurations
Loading... ... loading table ... |
| Item No. | Denomination | Gas | PRV | Signalization |
|---|---|---|---|---|
| 0727324 | MC80 STAB | O2 | With pull-ring | 4–20 mA |
| 0727324 | MC80 STAB | Air | With pull-ring | 4–20 mA |
| 0727326 | MC80 STAB | N2O, CO2 | With pull-ring | 4–20 mA |
| 0727339 | MC80 STAB | ALL | With pull-ring | Contact gauge |
| 0727340 | MC80 STAB | ALL | With pull-ring | 4–20 mA |
Quality Standards
We comply with all relevant regulations
See our CERTIFICATIONS >MC80 - StabilizerDownloads
Find our Products
Source our products wherever you are
You can have confidence in our global network
Copyright © 2024 GCE. All rights reserved.
GCE Group
Turmstrasse 30
6321 Steinhausen
Zug
Switzerland
