Rail 2000 System
Cylinder trolleys and holders, Flowmeters
A single extruded aluminum section designed to fit directly to the wall, without the requirement for additional mounting brackets and fixing kits.
Rail 2000 SystemIntroduction
Most types of rail clamp can be used and the rail is suitable for both general and heavy duty purposes. The rail is supplied cut into lengths of up to 3 meters, inclusive of all trim, infill and caps and wall fixings (there are no extras).
Rail 2000 SystemIntroduction
Most types of rail clamp can be used and the rail is suitable for both general and heavy duty purposes. The rail is supplied cut into lengths of up to 3 meters, inclusive of all trim, infill and caps and wall fixings (there are no extras).
Rail 2000 SystemFeatures
Extruded Anodized Aluminum
The Rail 2000 system is an extruded anodized aluminum section which is secured direct to the wall in a horizontal plane.
Silicon Rubber Featheredge Strip
To avoid dirt and contamination traps, a silicon rubber featheredge strip is supplied to be fitted to the top and bottom of the tail at the interface with the wall.
Wall Fixings Covered
A plastic insert is fitted into the middle of the rail to cover the wall fixings.
Standard or Heavy Duty Applications
The rail is suitable for standard or heavy duty applications dependent on Wall Fixings.
Lengths up to 3 Metres
The Rail is available in lengths of up to a maximum of 3 meters, and is supplied with plastic end caps. Should lengths in excess of 3 meters be required, joining Kits are available.
Rail 2000 SystemFeatures
Extruded Anodized Aluminum
The Rail 2000 system is an extruded anodized aluminum section which is secured direct to the wall in a horizontal plane.
Silicon Rubber Featheredge Strip
To avoid dirt and contamination traps, a silicon rubber featheredge strip is supplied to be fitted to the top and bottom of the tail at the interface with the wall.
Wall Fixings Covered
A plastic insert is fitted into the middle of the rail to cover the wall fixings.
Standard or Heavy Duty Applications
The rail is suitable for standard or heavy duty applications dependent on Wall Fixings.
Lengths up to 3 Metres
The Rail is available in lengths of up to a maximum of 3 meters, and is supplied with plastic end caps. Should lengths in excess of 3 meters be required, joining Kits are available.
Rail 2000 SystemGallery & Videos
Rail 2000 SystemGeneral properties
General properties
| Part No. 2120 (please state length)(inclusive of trim, infill, end caps and wall fixings) | |
| Rail without any trim etc. | Part No. 2120-01 |
| Featheredge rail trim | Part No. 2120-02 |
| Blue Facing Strip (Infill) | Part No. 2120-03 |
| End Caps (Pair) | Part No. 2120-04 |
| Standard Screw and Plug | Part No. 2130 |
| Spring Toggle and Screw | Part No. 2131 |
| Interset Fixing and Screw | Part No. 2141 |
Quality Standards
We comply with all relevant regulations
See our CERTIFICATIONS >Rail 2000 SystemDownloads
Find our Products
Source our products wherever you are
You can have confidence in our global network
Copyright © 2024 GCE. All rights reserved.
GCE Group
Turmstrasse 30
6321 Steinhausen
Zug
Switzerland
