Simplex MMR

Manifolds and stabilizers

The Simplex MMR gas manifold is suitable for such health care where the capacity requirement is limited, such as laboratories and small health care clinics, veterinary etc

Find out more USE OUR CONFIGURATOR

30m3/h

Capacity

USE OUR CONFIGURATOR

Simplex MMR

Simplex MMRIntroduction

This gas manifold consists of only one group of cylinders.
The regulator is mounted in the collection unit. Each inlet connection has a fi lter, a non-return valve and a shut-off valve. This arrangement makes it possible to use one cylinder at a time.
In order to obtain a stabile outlet pressure this gas manifold is equipped with a preset two-stage regulator. On the high pressure side of the regulator there is a contact gauge the signal of which can be carried further to an alarm unit.

Simplex MMRFeatures

SIMPLEX MMR INCLUDES THE FOLLOWING COMPONENTS:

Gas cylinder manifold Simplex MMR
Collecting pipe Manyflow block for three hoses
Gas evacuation kits for collecting pipe

FOR A COMPLETE SIMPLEX MMR ADD:

Gas alarm
Pressure relieve valve with manual activation
High pressure hoses with safety wire
Cylinder retaining brackets (included in gas cylinder collecting pipe set)
Gas name signs
Pressure relieve valve

General properties

Gas type(s)	O₂, Air, N₂, N₂O, CO₂
Nominal flow (m3/h)	30
Inlet nominal pressure (BAR)	200 (20000 kPa)
Outlet nominal pressure	5 bar (setting range 4–5 bar)
Inlet connection	W21,8×1/14"M
Outlet connection	G3/8"M
Pressure relieve valve	6 bar
Pressure relieve valve pipe dimension	ø 8 mm
Purge valves connection	W21,8×1/14"M+pipe ø 15 mm