MM40 - Stabilizer
Manifolds and stabilizers
Manifold MM40 – STABILIZER is a second stage pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units.
MM40 - StabilizerIntroduction
MM40 – STABILIZER is only a second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MM40 – HP Unit). In case of a signal for pressure deviation in relation
to the alarm settings, the alarm can easily be displayed on a gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter
4–20 mA or with pressure switches. Gas reduction unit MM40 – STABILIZER must always be installed in compliance with the standards EN ISO 7396-1 and the appropriate national standards.
MM40 - StabilizerIntroduction
MM40 – STABILIZER is only a second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MM40 – HP Unit). In case of a signal for pressure deviation in relation
to the alarm settings, the alarm can easily be displayed on a gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter
4–20 mA or with pressure switches. Gas reduction unit MM40 – STABILIZER must always be installed in compliance with the standards EN ISO 7396-1 and the appropriate national standards.
MM40 - StabilizerFeatures
FOR A COMPLETE MM40 STABILIZER MANIFOLD ADD:
- Plastic cover for locking
- Alarm unit (included if ordered together with HP unit)
MM40 - StabilizerFeatures
FOR A COMPLETE MM40 STABILIZER MANIFOLD ADD:
- Plastic cover for locking
- Alarm unit (included if ordered together with HP unit)
MM40 - StabilizerGeneral properties
General properties
| Gases | O2, Air, Air-800, N2, N2O, CO2 |
|---|---|
| Nominal flow (m3/h) | 40 |
| Inlet maximal pressure | 16 (1600 kPa) |
| Outlet nominal pressure | 4,5 bar (setting range 0,5–10 bar) |
| Inlet connection 1 | G1/2"M + soldering piece pipe ø 12 mm |
| Inlet connection 2 | Optional (G1/2"M + soldering piece pipe ø 12 mm) |
| Outlet connection | G1/2"M + soldering piece pipe ø 12 mm |
| Pressure relieve valve | Optional (6,8 bar; outlet pipe ø 15 mm) |
| Pressure sensors | Optional (Pressure switches; Transmitter 4–20 mA) |
| Emergency QC inlet | Optional QC by national standards |
Configurations
Loading... ... loading table ... |
| Item No. | Denomination | Gas | PRV | Signalization |
|---|---|---|---|---|
| 0727329 | MM40 – Stabilizer | O2, N2O, Air, CO2, N2 | ||
| 0727337 | MM40 – Stabilizer | Air–800 | ||
| 0727332 | MM40 – Stabilizer | O2, N2O, Air, CO2, N2 | With pull-ring | Pressure switch |
| 0727344 | MM40 – Stabilizer | O2, N2O, Air, CO2, N2 | With pull-ring | 4-20mA |
| 0727343 | MM40 – Stabilizer | O2 | ||
| 0727346 | MM40 – Stabilizer | Air | ||
| 0727347 | MM40 – Stabilizer | Air–800 | ||
| 0727348 | MM40 – Stabilizer | CO2 | ||
| 0727364 | MM40 – Stabilizer | N2O |
Quality Standards
We comply with all relevant regulations
See our CERTIFICATIONS >MM40 - StabilizerDownloads
Find our Products
Source our products wherever you are
You can have confidence in our global network
Copyright © 2024 GCE. All rights reserved.
GCE Group
Turmstrasse 30
6321 Steinhausen
Zug
Switzerland
