MM40 HP Unit Automatic Gas Manifold
Manifolds and stabilizers
The GCE MM40 HP Unit is an automatic gas manifold that ensures continuous gas supply by seamlessly switching between operational and reserve sides without interrupting the flow.
MM40 HP Unit Automatic Gas ManifoldIntroduction
The GCE MM40 HP Unit automatic gas manifold operates based on the principle of pressure differences between the operational and reserve regulators. Using a manual lever, the operator can select which side will be the operational and which will be the reserve. When the operational side is depleted, the medical gas manifold automatically switches to the reserve side with lower regulator pressure, ensuring a continuous gas supply without interrupting the flow.
MM40 HP Unit Automatic Gas ManifoldIntroduction
The GCE MM40 HP Unit automatic gas manifold operates based on the principle of pressure differences between the operational and reserve regulators. Using a manual lever, the operator can select which side will be the operational and which will be the reserve. When the operational side is depleted, the medical gas manifold automatically switches to the reserve side with lower regulator pressure, ensuring a continuous gas supply without interrupting the flow.
MM40 HP Unit Automatic Gas ManifoldFeatures
Gas Alarm Accessory
The gas alarm is a standard feature, providing both visual and audible alerts for enhanced safety. It can communicate with other equipment through relays, ensuring integrated system functionality.
First-Stage Regulation
The MM40 gas manifold serves as the first stage of regulation and must be installed alongside a stabilizer to maintain the final pressure at hospital gas outlets.
Regulatory Compliance
GCE medical gas manifolds are CE-marked and fully comply with ISO 7396-1 standards, guaranteeing reliable and safe performance.
MM40 HP Unit Automatic Gas ManifoldFeatures
Gas Alarm Accessory
The gas alarm is a standard feature, providing both visual and audible alerts for enhanced safety. It can communicate with other equipment through relays, ensuring integrated system functionality.
First-Stage Regulation
The MM40 gas manifold serves as the first stage of regulation and must be installed alongside a stabilizer to maintain the final pressure at hospital gas outlets.
Regulatory Compliance
GCE medical gas manifolds are CE-marked and fully comply with ISO 7396-1 standards, guaranteeing reliable and safe performance.
MM40 HP Unit Automatic Gas ManifoldGeneral properties
General properties
| Gases | O2, Air, N2, N2O, CO2 |
|---|---|
| Nominal flow (m3/h) | 40 |
| Inlet nominal pressure (BAR) | 200 (20000 kPa) |
| Outlet nominal pressure | 12 bar (setting range 9–16 bar) |
| Inlet connection | W21,8×1/14"M |
| Outlet connection | G1/2"M + soldering piece pipe ø 10, ø 15 mm |
| Pressure relieve valve | 17 bar |
| Pressure relieve valve pipe dimension | ø 10 mm |
| Purge valves connection | W21,8×1/14"M |
Configurations
Loading... ... loading table ... |
| Item No. | Denomination | Petrol | PRV | Signalling |
|---|---|---|---|---|
| 0732307 | MM40 – HP unit 2×1 | O2, Air, N2 | Standard | Alarm TMA6703 |
| 0732308 | MM40 – HP unit 2×1 | O2, Air, N2 | With pull-ring | Alarm TMA6703 |
| 0727334 | MM40 – HP unit 2×1 | O2, Air, N2, N2O, CO2 | Standard | *basic version without electric sensors |
| 0732310 | MM40 – HP unit 2×1 | N2O, CO2 | Standard | Alarm TMA6703 |
| 0732311 | MM40 – HP unit 2×1 | N2O, CO2 | With pull-ring | Alarm TMA6703 |
| 0727371 | MM40 – HP unit 2×1 | O2, Air, N2 | Standard | 4-20 mA |
Quality Standards
We comply with all relevant regulations
See our CERTIFICATIONS >MM40 HP Unit Automatic Gas ManifoldDownloads
Related products
MM40 Stabilizer
TMA6703 Medical Gas Alarm
MC25 Gas Cylinder Manifold
MM90 HP Unit Semi-Automatic Manifold
MM90 HP Unit Fully Automatic Manifold
Duplex PNP50 Two-Stage Gas Manifold
Find our Products
Source our products wherever you are
You can have confidence in our global network
Copyright © 2024 GCE. All rights reserved.
GCE Group
Turmstrasse 30
6321 Steinhausen
Zug
Switzerland
